Subject: [BK PATCH] USB changes for 2.5.21
From: Greg KH <[email-masked]>
To: [email-masked]
Cc: [email-masked]

More USB changes for 2.5.21

Pull from:  bk://linuxusb.bkbits.net/linus-2.5

 drivers/usb/Makefile                 |    1 
 drivers/usb/class/printer.c          |    8 
 drivers/usb/core/message.c           |    8 
 drivers/usb/host/ohci-hcd.c          |  103 ++++++----
 drivers/usb/input/Config.help        |   11 +
 drivers/usb/input/Config.in          |    1 
 drivers/usb/input/Makefile           |    3 
 drivers/usb/input/aiptek.c           |  339 +++++++++++++++++++++++++++++++++++
 drivers/usb/media/ov511.c            |    2 
 drivers/usb/media/pwc-if.c           |    2 
 drivers/usb/media/se401.c            |   18 -
 drivers/usb/media/stv680.c           |    2 
 drivers/usb/media/stv680.h           |    2 
 drivers/usb/media/vicam.c            |    2 
 drivers/usb/net/kaweth.c             |   23 +-
 drivers/usb/serial/belkin_sa.c       |    4 
 drivers/usb/serial/cyberjack.c       |    4 
 drivers/usb/serial/digi_acceleport.c |    8 
 drivers/usb/serial/empeg.c           |    4 
 drivers/usb/serial/ftdi_sio.c        |    8 
 drivers/usb/serial/io_tables.h       |   16 -
 drivers/usb/serial/ipaq.c            |    4 
 drivers/usb/serial/ir-usb.c          |    4 
 drivers/usb/serial/keyspan.h         |   16 -
 drivers/usb/serial/keyspan_pda.c     |   12 -
 drivers/usb/serial/kl5kusb105.c      |    4 
 drivers/usb/serial/mct_u232.c        |    4 
 drivers/usb/serial/omninet.c         |    2 
 drivers/usb/serial/pl2303.c          |    4 
 drivers/usb/serial/safe_serial.c     |    4 
 drivers/usb/serial/usb-serial.h      |   22 +-
 drivers/usb/serial/usbserial.c       |  110 +++++++++--
 drivers/usb/serial/visor.c           |   41 ++--
 drivers/usb/serial/whiteheat.c       |   34 +--
 34 files changed, 656 insertions(+), 174 deletions(-)
------

[email-masked], 2002-06-14 13:59:39-07:00, [email-masked]
  USB: fixups due to the aiptek patch to get everything to build properly.

 drivers/usb/Makefile       |    1 +
 drivers/usb/input/Makefile |    2 +-
 drivers/usb/input/aiptek.c |    6 ++++++
 3 files changed, 8 insertions(+), 1 deletion(-)
------

[email-masked], 2002-06-14 13:57:18-07:00, [email-masked]
  [PATCH] add Aiptek 8000U USB driver
  
  This patch adds support for the Aiptek 8000U driver to the kernel tree.

 drivers/usb/input/Config.help |   11 +
 drivers/usb/input/Config.in   |    1 
 drivers/usb/input/Makefile    |    1 
 drivers/usb/input/aiptek.c    |  333 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 346 insertions(+)
------

[email-masked], 2002-06-14 13:35:21-07:00, [email-masked]
  USB serial drivers: changed startup() to attach() due to usbserial api change.

 drivers/usb/serial/belkin_sa.c       |    2 +-
 drivers/usb/serial/cyberjack.c       |    2 +-
 drivers/usb/serial/digi_acceleport.c |    4 ++--
 drivers/usb/serial/empeg.c           |    2 +-
 drivers/usb/serial/ftdi_sio.c        |    4 ++--
 drivers/usb/serial/io_tables.h       |    8 ++++----
 drivers/usb/serial/ipaq.c            |    2 +-
 drivers/usb/serial/ir-usb.c          |    2 +-
 drivers/usb/serial/keyspan.h         |    8 ++++----
 drivers/usb/serial/keyspan_pda.c     |    6 +++---
 drivers/usb/serial/kl5kusb105.c      |    2 +-
 drivers/usb/serial/mct_u232.c        |    2 +-
 drivers/usb/serial/pl2303.c          |    2 +-
 drivers/usb/serial/safe_serial.c     |    2 +-
 14 files changed, 24 insertions(+), 24 deletions(-)
------

[email-masked], 2002-06-14 13:34:29-07:00, [email-masked]
  USB whiteheat driver: changes due to the usb-serial api changes.
  	- moved the firmware download to probe() time

 drivers/usb/serial/whiteheat.c |   30 +++++++++++++++---------------
 1 files changed, 15 insertions(+), 15 deletions(-)
------

[email-masked], 2002-06-14 13:33:03-07:00, [email-masked]
  USB visor driver: changes due to core api changes
  
  - added calc_num_ports() ability to determine the number of actual
    ports the device has on the fly.  This should help out with some
    of the Palm and Sony devices.

 drivers/usb/serial/visor.c |   31 ++++++++++++++++++++++++-------
 1 files changed, 24 insertions(+), 7 deletions(-)
------

[email-masked], 2002-06-14 13:31:35-07:00, [email-masked]
  USB: usb-serial api changes
  	- added calc_num_ports() callback so that driver can override the
  	  fixed num_ports value after querying the device.
  	- split startup() callback into probe() and attach() in anticipation
  	  of the driverfs api changes
  	- probe() is called before the usb_serial structure is set up,
  	  and can be used to download firmware to a device, and other
  	  early initialization.
  	- attach() is called after the usb_serial structure is completely
  	  setup, allowing the device to create private structures, and
  	  have full access to the device.

 drivers/usb/serial/usb-serial.h |   22 ++++++--
 drivers/usb/serial/usbserial.c  |  110 ++++++++++++++++++++++++++++++++--------
 2 files changed, 107 insertions(+), 25 deletions(-)
------

[email-masked], 2002-06-14 09:45:04-07:00, [email-masked]
  [PATCH] usb_set_interface for discontinous altsettings
  
  during debugging ALSA's usb audio driver, it's found out that there
  are devices with insuccessive alternate settings.
  
  for example, m-audio's quattro usb audio has audio streaming
  descriptors jumping from altset 0 to 4 or 3.
  
  apparently, usb_set_interface() sends the array index instead of the
  actual altset value.  the attached patch fixes this behavior.

 drivers/usb/core/message.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)
------

[email-masked], 2002-06-13 16:45:54-07:00, [email-masked]
  [PATCH] usblp_ioctl for non-little-endian machines
  
  ioctl(LPGETSTATUS) is known to put the status into  an  int.  The  usblp
  driver has a problem in this area as it does not put it into an int  but
  into a char. Let's see :
  
  from drivers/char/lp.c : lp_ioctl :
      int status
      copy_to_user((int *) arg, &status, sizeof(int))
  
  from drivers/usb/printer.c : usblp_ioctl :
      unsigned char status;
      copy_to_user ((unsigned char *)arg, &status, 1)
  
  Even though in  most  cases  it  can  work  unnoticed  on  little-endian
  machines ;o), it's broken on non-little-endian machines (I got bitten on
  PPC).

 drivers/usb/class/printer.c |    8 +++++---
 1 files changed, 5 insertions(+), 3 deletions(-)
------

[email-masked], 2002-06-13 16:43:37-07:00, [email-masked]
  [PATCH] USB: saving memory on kaweth
  
  this saves memory by making the buffer for firmware temporary.

 drivers/usb/net/kaweth.c |   23 ++++++++++++++++-------
 1 files changed, 16 insertions(+), 7 deletions(-)
------

[email-masked], 2002-06-13 16:39:09-07:00, [email-masked]
  [PATCH] ohci-hcd init err detect
  
  Here's a followup patch, should apply on top of what I sent
  this morning ... please do so!  (Sorry, same name but the
  patch is different.)
  
  Along with some cleanups, this actually restores a line that
  was dropped somewhere in 2.5 ... basically, at least SiS and
  OPTi violate the OHCI spec so they don't init "by the book".

 drivers/usb/host/ohci-hcd.c |   59 ++++++++++++++++++++++++++------------------
 1 files changed, 36 insertions(+), 23 deletions(-)
------

[email-masked], 2002-06-12 14:15:25-07:00, [email-masked]
  USB: fixed problems when CONFIG_HOTPLUG=n and usb drivers were built into the kernel.
    
  removed __devinitdata and __devinit on structures and functions that should
  not have them.
  Thanks to Tom Rini for pointing this out.

 drivers/usb/media/ov511.c            |    2 +-
 drivers/usb/media/pwc-if.c           |    2 +-
 drivers/usb/media/se401.c            |   18 ++----------------
 drivers/usb/media/stv680.c           |    2 +-
 drivers/usb/media/stv680.h           |    2 +-
 drivers/usb/media/vicam.c            |    2 +-
 drivers/usb/serial/belkin_sa.c       |    2 +-
 drivers/usb/serial/cyberjack.c       |    2 +-
 drivers/usb/serial/digi_acceleport.c |    4 ++--
 drivers/usb/serial/empeg.c           |    2 +-
 drivers/usb/serial/ftdi_sio.c        |    4 ++--
 drivers/usb/serial/io_tables.h       |    8 ++++----
 drivers/usb/serial/ipaq.c            |    2 +-
 drivers/usb/serial/ir-usb.c          |    2 +-
 drivers/usb/serial/keyspan.h         |    8 ++++----
 drivers/usb/serial/keyspan_pda.c     |    6 +++---
 drivers/usb/serial/kl5kusb105.c      |    2 +-
 drivers/usb/serial/mct_u232.c        |    2 +-
 drivers/usb/serial/omninet.c         |    2 +-
 drivers/usb/serial/pl2303.c          |    2 +-
 drivers/usb/serial/safe_serial.c     |    2 +-
 drivers/usb/serial/visor.c           |   10 +++++-----
 drivers/usb/serial/whiteheat.c       |    4 ++--
 23 files changed, 39 insertions(+), 53 deletions(-)
------

[email-masked], 2002-06-12 13:59:06-07:00, [email-masked]
  [PATCH] ohci-hcd init err detect
  
  I tracked down some of those "can't enumerate" problems to a
  chip init problem.  This patch detects and reports that case
  (better than the current nasty failure mode, and worth keeping
  even after we have a fix that works on OPTi/SiS/...) as well as
  doing some other minor cleanup.

except that the repository that you are pushing to is 52 changesets
ahead of your repository. Please do a "bk pull" to get 
these changes or do a "bk pull -nl" to see what they are.
 drivers/usb/host/ohci-hcd.c |   44 ++++++++++++++++++++++++++++++--------------
 1 files changed, 30 insertions(+), 14 deletions(-)
------