index_title=Webmin
index_return=webmin

access_title=IPʿ
access_desc=ͨ, ֹĳЩIPַWebmin.  ( foo.bar.com)  IP ַ ( 10.254.3.0  10.254.1.0/255.255.255.128). Ӧóֻпŵĵַܷķ, رǵķԴInternetʱ. , κֻҪµͿȫϵͳ.
access_header=ʿ
access_all=еַ
access_allow=ֻгĵַ
access_deny=ֹгĵַ
access_err=·бʧ
access_enone=ûַ
access_enet='$1' һϷַ
access_emask='$1' һϷַ
access_eip='$1' һIPַ
access_ehost=Ҳ '$1'IP
access_eself=㵱ǰIPַ ($1) ᱻֹ

bind_title=˿ַ
bind_desc=WebminڵжIPַ, Webminһַ. WebminTCP˿ͬ. ע -- ޸Ķ˿ڻַ, ʾµ¼.
bind_header=IPַ˿
bind_ip=IPַ
bind_all=
bind_port=Ķ˿
bind_err=޷ıַ
bind_eip=Ҳ '$1'IP
bind_eassign=ϵͳû'$1'ַ
bind_eport=˿$1ʹ

log_title=־
log_desc=Webminóɽҳ¼һ׼CLFʽ־ļ. ־, 㻹ѡ¼ЩIPַ, ೤ʱ־. ־дļ $1 .
log_header=Web־
log_disable=д־
log_enable=д־
log_resolv=¼
log_clear=ÿ $1 Сʱ־
log_err=޷־ѡ
log_ehours='$1' һЧСʱ

proxy_title=
proxy_desc=Webminڵڷǽ, ҪôwebFTPվ. ĳЩģ, <tt>(Software Packages)</tt>, ҪͨЩļ.
proxy_header=
proxy_http=HTTP
proxy_ftp=FTP
proxy_none=
proxy_nofor=µַʹô
proxy_err=޷
proxy_ehttp=HTTPURLʽ
proxy_eftp=FTPURLʽ

colours_title=Colour Scheme
colours_desc=This form allows you to edit the colour scheme used by all modules. Each colour is defined using the standard RGB system, where each value is a hex number from 00 to ff. 
colours_header=Colour Scheme
colours_default=Default
cs_page=ҳ
cs_text=ı
cs_table=
cs_header=ͷ
cs_link=ı
colours_err=ɫʧ
colours_ered=ɫֵ '$1' Ƿ
colours_egreen=ɫֵ '$1' Ƿ
colours_eblue=ɫֵ '$1' Ƿ

mods_title=Webmin ģ
mods_desc1=Webmin modules can be added after installation by using the form to the right. Modules are typically distributed in <tt>.wbm</tt> files, each of which can contain one or more modules. If a module is licenced to run only on a certain host, you may not be able to install it.
mods_install=װģ
mods_local=ļ
mods_uploaded=ļ
mods_ftp= ftp  http URL
mods_installok=ļװģ
mods_desc2=If you wish to have more than one copy of the same module with different configurations, the form to the right allows you to clone any existing module. The clone will have a new name, a new module configuration, new access control options and may be made available to different users.
mods_clone=Clone ģ
mods_cname=Module to clone
mods_cnew=Cloned ģ
mods_cloneok=Clone Module
mods_desc3=Existing modules and clones of modules can be deleted using the form below. If a module with clones is deleted, they will also be removed. Once a module has been deleted it must be reinstalled before you can use it again. A module cannot be deleted if other modules depend on it.
mods_delete=ɾģ
mods_deleteok=ɾѡģ

install_err1= $1 װģʧ
install_efile=ļ
install_err2=װļʧ
install_ebrowser=֧ļ
install_err3= $1 װļʧ
install_eurl=Ƿ URL
install_etar=Ƿģļ : $1
install_einfo=ģ $1 ȱ module.info ļ
install_enone=ļκģ
install_eos=ģ $1 ָ֧òϵͳ ($2 $3)
install_ever=ģ $1 Ҫ Webmin version $2 
install_edep=ģ $1 Ҫģ $2
install_eextract=Extract failed : $1
install_title=װģ
install_desc=ģѾɹװķʿб :
install_line=$1 in $2 ($3 Kb)

clone_err=Failed to clone module
clone_elink=symlink failed : $1
clone_ecopy=failed to copy config : $1
clone_desc=Clone of $1

delete_err=ɾģʧ
delete_edep=޷ɾģ $1 , Ϊģ $2 
delete_desc1=$1 (Clone of $2)
delete_desc2=$1 in $2 ($3 Kb)
delete_title=ɾģ
delete_msg=The following modules have been successfully deleted from your Webmin installation :

os_title=ϵͳ
os_desc=This form allows you to change the operating system Webmin treats your system as. This can be useful if you have upgraded your machine to a new version of your operating system distribution. Note that the configuration of installed modules will not be changed, even if there are differences between the old and new systems.
os_header=ϵͳ
os_curros=ǰϵͳ
os_currver=ǰ OS 汾
os_new=²ϵͳ

lang_title=
lang_title2=Webmin 
lang_lang=ʾ
lang_intro=This page allows you to choose which language Webmin will use for displaying titles, prompts and messages
lang_ok=ı

ssl_title=SSL Encryption
ssl_desc1=The host on which Webmin is running appears to have the SSLeay Perl module installed. Using this, Webmin supports SSL encrypted communication between your browser and the server. If you are accessing your Webmin server over the Internet, then you should definately consider using SSL to prevent an attacker capturing your Webmin password.
ssl_desc2=Warning - only turn on SSL support if you have a browser that supports SSL (such as Netscape or IE), and there is no firewall blocking <b>https</b> requests between your browser and the Webmin host
ssl_header=SSL ֧
ssl_enable= SSL ֧
ssl_disable=ֹ SSL ֧

startpage_title=Index Page Options
startpage_intro=This page allows you to define how many icons you want to have per row on the index page
startpage_tabs=Categorise modules?
startpage_nocol=Number of Columns
startpage_alt=Use alternative header
startpage_ecols='$1' is not a valid number of columns
startpage_gotoone=Go direct to module<br>if user only has one?

upgrade_title=Upgrade Webmin
upgrade_desc=This form allows you to upgrade your entire webmin installation to a new version. You can install from a local file, an uploaded file or from the latest version at <a href=http://www.webmin.com/>www.webmin.com</a>. Just as with a manual upgrade, all your config settings and third-party modules will be kept.
upgrade_local=From local file
upgrade_uploaded=From uploaded file
upgrade_ftp=Latest version from www.webmin.com
upgrade_ok= Webmin
upgrade_err1= $1 ʧ
upgrade_err2=ļʧ
upgrade_err3= www.webmin.com ʧ
upgrade_efile=ļ
upgrade_ebrowser=֧ļ
upgrade_eversion=޷µ汾 $1
upgrade_egunzip=ϵͳû <tt>gunzip</tt> 
upgrade_etar= webmin tar ļǷ
upgrade_setup=Running setup.sh script to upgrade Webmin .. Please wait a minute until it is complete before continuing.

